Okay, so I’ve been meaning to get my hands on a model of the Racing Ford Capri for a while. I finally decided to just go for it. I started by, you know, just looking around online, seeing what was out there.
I found a few different kits, some were pre-built, some you had to put together yourself. I’m not gonna lie, the pre-built ones looked tempting, but where’s the fun in that, right? I went with a kit – felt more like my own project that way.
Getting Started
When the box arrived, I ripped that thing open! Inside, it was just a whole bunch of plastic pieces, some decals, and the instructions. Honestly, it looked a little overwhelming at first. I spread everything out on my table, trying to get organized.
I started by carefully reading the instructions. I mean, REALLY reading them, front to back. I’ve messed up models before by skipping steps, so I was being extra careful this time.
- First up, I started separating the parts from the plastic frames. Used some little clippers I had to make sure I didn’t break anything.
- Then, I spent some time sanding down the little nubs left over from where the pieces were attached. Gotta make it smooth, you know?
Putting it Together
The instructions had me start with the chassis, which made sense. I slowly started gluing pieces together. I’m not the most patient person, but I took my time, making sure everything lined up right. Used some clamps to hold things in place while the glue dried.
Next, I tackled the engine. This was definitely the most fiddly part. So many tiny little pieces! I used tweezers for a lot of it, and even then, my fingers felt huge. But, slowly but surely, the engine started to take shape.
Painting and Details
Once the main body was assembled, it was time for paint. I went with the classic blue and white racing colors. Did a few coats, letting each one dry completely before adding the next. Made a bit of a mess, but hey, that’s part of the process, right?
The decals were the final touch. These were super thin and delicate, so I had to be extra careful. Used some water to slide them into place, then gently dabbed them dry. Honestly, the decals really made the whole thing pop!
Finished!
So, there you have it. My Racing Ford Capri. Took me a few evenings, and there were definitely moments where I thought I’d messed it up, but it all came together in the end. It’s not perfect, but I built it, and that’s what counts. Now it’s sitting proudly on my shelf, and every time I look at it, I remember the whole process. Pretty cool, if I do say so myself!
